liu_kunlun 发表于 2012-9-6 14:13:06

怎样在lisp中得到捕捉标记的大小

本帖最后由 liu_kunlun 于 2012-9-6 14:17 编辑

aperture及pickbox都不是

Andyhon 发表于 2012-9-6 14:42:00

aperture及pickbox都不是 !???

PICKBOX System Variable
Sets the object selection target height, in pixels.

=====================================================

APERTURE System Variable
Sets the display size for the aperture, in pixels.
The aperture is the selection tool used in drawing commands.

------------------------------------

APBOX System Variable
Turns the AutoSnap? aperture box on or off.
The aperture box is displayed in the center of the crosshairs when you snap to an object.
0 Aperture box is not displayed
1 Aperture box is displayed


楼主得先描述下,好让大伙儿有所依循

liu_kunlun 发表于 2012-9-6 16:52:36

修改2变量，你会发现不会影响执行捕捉时（例如画线捕捉点），显示的捕捉标记大小。

Andyhon 发表于 2012-9-6 17:21:59

AutoSnapSize

Ref:
http://bbs.mjtd.com/thread-90599-1-1.html
http://bbs.mjtd.com/blog-43121-168.html
http://bbs.mjtd.com/thread-4309-1-1.html

liu_kunlun 发表于 2012-9-7 12:55:18

谢谢andyhon
页: [1]
查看完整版本: 怎样在lisp中得到捕捉标记的大小